Heat distribution under microwave heating treatment

This paper presents the process of microwave heating treatment to kill the rice weevil to improve the quality and quantity of rice for industrial storage purpose. Since many years ago, heat uniformity has been a major drawback of microwave heating application. The heat distribution in rice after undergoing four treatments with a microwave frequency of 2.4 GHz at the different power level of 540 and 900W with different time treatment of 50 and 80 seconds are shown in this paper. The samples are placed inside a square container, 8.5 cm x 8.5 cm x 2 cm. Each sample contains 15 adults of rice weevil of Sitophilus Oryzae placed randomly in the container and the mortality of the rice weevil for adult stages from each treatment are observed and interpreted in Analysis of Variance (ANOVA) technique

Planar Microwave Sensors for Accurate Measurement of Material Characterization: A Review

Microwave sensor is used in various industrial applications and requires highly accurate measurements for material properties. Conventionally, cavity waveguide perturbation, free-space transmission, open-ended coaxial probe, and planar transmission line technique have been used for characterizing materials. However, these planar transmission lines are often large and expensive to build, further restricting their use in many important applications. Thus, this technique is cost effective, easy to manufacture and due to its compact size, it has the potential to produce sensitivity and a high Q-factor for various materials. This paper reviews the common characteristics of planar transmission line and discusses numerous studies about several designs of the microstrip resonator to improve the sensor performance in terms of the sensitivity and accuracy. This technique enables its use for several industrial applications such as agriculture and quality control. It is believed that previous studies would lead to a promising solution of characterizing materials with high sensitivity, particularly in determining a high Q-factor resonator sensor

Energy efficient anti-collision algorithm for the RFID networks

Energy efficiency is crucial for radio frequency identification (RFID) systems as the readers are often battery operated. The main source of the energy wastage is the collision which happens when tags access the communication medium at the same time. Thus, an efficient anti-collision protocol could minimize the energy wastage and prolong the lifetime of the RFID systems. In this regard, EPCGlobal-Class1-Generation2 (EPC-C1G2) protocol is currently being used in the commercial RFID readers to provide fast tag identification through efficient collision arbitration using the Q algorithm. However, this protocol requires a lot of control message overheads for its operation. Thus, a reinforcement learning based anti-collision protocol (RL-DFSA) is proposed to provide better time system efficiency while being energy efficient through the minimization of control message overheads. The proposed RL-DFSA was evaluated through extensive simulations and compared with the variants of EPC-Class 1 Generation 2 algorithms that are currently being used in the commercial readers. The results show conclusively that the proposed RL-DFSA performs identically to the very efficient EPC-C1G2 protocol in terms of time system efficiency but readily outperforms the compared protocol in the number of control message overhead required for the operation

State-of-the-Art Developments of Acoustic Energy Transfer

Acoustic energy transfer (AET) technology has drawn significant industrial attention recently. This paper presents the reviews of the existing AETs sequentially, preferably, from the early stage. From the review, it is evident that, among all the classes of wireless energy transfer, AET is the safest technology to adopt. Thus, it is highly recommended for sensitive area and devices, especially implantable devices. Though, the efficiency for relatively long distances (i.e., >30 mm) is less than that of inductive or capacitive power transfer; however, the trade-off between safety considerations and performances is highly suitable and better than others. From the presented statistics, it is evident that AET is capable of transmitting 1.068 kW and 5.4 W of energy through wall and in-body medium (implants), respectively. Progressively, the AET efficiency can reach up to 88% in extension to 8.6 m separation distance which is even superior to that of inductive and capacitive power transfer

High Quality Factor Using Nested Complementary Split Ring Resonator For Dielectric Properties Of Solids Sample

A Nested complementary split ring resonator (CSRR) was proposed based on planar structure. The main objective of this work is to get a higher quality factor (Q-factor) with minimal error detection of complex permittivity. The sensor operated at the 3.37GHz resonant frequency and simulated by ANSYS HFSS software. Subsequently, the designed sensor has been fabricated and tested with the presence of several material under test (MUTs) placed over the sensor. The result achieved high unloaded Q-factor, 464. There has been proof of good agreement concerning the results between theoretical, simulation, and measured parameters of error detection, which is below 13.2% real part permittivity and 2.3% the loss tangent. The proposed sensor is practically useful for the food industry, bio-sensing, and pharmacy industry applications

Design of Savonius model wind turbine for power catchment

In this study, the fossil fuel usage by-product is carbon dioxide, which is known as the primary cause in global warming. Alternatively, wind energy is a clean alternative energy source compared the fuel consumption can cause smoke pollution. The goal of the work is to develop a pollution controller device model Savonius wind turbine to represent the characterized actual speed wind turbine concepts into convert kinetic energy into electric energy from campus and monitoring all output data display on the cloud. The wind speed operation is enabled through the use of ESP8266 as internet of things (IoT) platform and the alternating current (AC) direct current (DC) harvesting circuit into improve stability of the wind energy performance. Secondly, a magnet coil synchronous generator is used, which is a grid coupled through a diode rectifier and voltage source converter. The parameters that have been measured using wireless fidelity (Wi-Fi) module ESP8266 are considering wind speed, current, voltage and power. The wind speed with 7.8 MPH can produce a maximum output voltage and output current of 1.104 V and 4.321 μA, respectively. Blynk applications functional as role present performance monitoring kit wind turbine analysis with more precise and efficient in anywhere and anytime

Review Article of Radio Frequency and Microwave Heating Treatment to Disinfest Kutu Beras in Malaysian Rice

This article presents the basic principle of radio frequency (RF) and microwave heating and its application in agricultural sector specifically to control rice insects for storage purpose. Experiment findings of the past few years are highlighted according to the heating mechanism which influence the response of rice and insect exposed to the microwave field

Liquid-Based Reconfigurable Antenna Technology: Recent Developments, Challenges and Future

Advances in reconfigurable liquid-based reconfigurable antennas are enabling new possibilities to fulfil the requirements of more advanced wireless communication systems. In this review, a comparative analysis of various state-of-the-art concepts and techniques for designing reconfigurable antennas using liquid is presented. First, the electrical properties of different liquids at room temperature commonly used in reconfigurable antennas are identified. This is followed by a discussion of various liquid actuation techniques in enabling high frequency reconfigurability. Next, the liquid-based reconfigurable antennas in literature used to achieve the different types of reconfiguration will be critically reviewed. These include frequency-, polarization-, radiation pattern-, and compound reconfigurability. The current concepts of liquid-based reconfigurable antennas can be classified broadly into three basic approaches: altering the physical (and electrical) dimensions of antennas using liquid; applying liquid-based sections as reactive loads; implementation of liquids as dielectric resonators. Each concept and their design approaches will be examined, outlining their benefits, limitations, and possible future improvements

A Novel Microwave Sensor With High-Q Resonator For High Sensitivity Material Characterization

In this work, a bridge element approach based on the circular SRR configuration is proposed for accurate measurement in terms of complex permittivity and the loss tangent. It is observed that the proposed inter-connected bridge structure based on split ring resonator provides better sensitivity for dielectric measurement when compared with the standard microwave SRR sensors. The sensor operating at 1 to 6 GHz frequency range with 2.5pL sample volume at a time. The mathematical derivation is generated by loading sample with a standard reference of the materials in order to develop the empirical model for the determination of complex permittivity and the loss tangent. As demonstrated by the results, the unloaded Q-factor improves more than 400 over the narrow bandwidth at operating frequency of 2.3 GHz and provides less than 5 dB of the insertion loss. The measured data of each sample are in good agreement with the corresponding reference values available in the literature having a typical average detection error of less than 2.04%. By comparison, this design has an identical performance goal and provides excellent sensing capability which can be implemented in chemical and biosensor applications